Glove Weight Check: What 3g, 4g and 5g Nitrile Gloves Actually Weigh — and How Buyers Verify It
A buyer guide to disposable glove weight: what 3g, 4g and 5g mean, why the reference size matters, and how to weigh gloves on arrival before accepting a 1,000-carton order.

A "4 g nitrile glove" is one glove that weighs 4 grams — usually quoted for a size M or L glove. That one number tells a buyer more about the glove than any thickness figure on its own: how much material went into it, how it is likely to hold up through a shift, and how much of the order's cost is material. It is only useful, though, if buyer and supplier agree on the reference size — and if the buyer checks the weight when the cartons arrive. This guide explains what the grams mean, how to weigh a delivery, and what to put in writing before you order.
| Check | What "done" looks like |
|---|---|
| Weight grade understood | You know the grams are per glove, quoted for one reference size (usually M or L). |
| Grade matched to use | Food service and cleaning usually take 3–4 g nitrile or vinyl; heavier grades suit longer wear and tougher tasks. |
| Reference size agreed | The size the weight is quoted for is written in the order. |
| On-arrival check done | A sample is weighed on a 0.01 g scale, the average is recorded, and photos are kept. |
| Remedy agreed | What happens if the check fails is agreed before production, not after delivery. |
1. What "3g" actually means
Glove weight is the weight of one glove, in grams. Disposable nitrile gloves are usually sold in grades of 3 g, 3.5 g, 4 g, 4.5 g and 5 g, and the grade is the first thing most buyers compare — before colour, before packing, before anything else. A 3 g glove is a light, sensitive glove for short tasks and frequent changes. A 5 g glove is a heavier glove built for longer wear and harder use. Most food-service and cleaning buyers order in the 3–4 g range.
The figure is always quoted for one reference size, usually M or L, because a size XL glove uses more material than a size S glove of the same grade. A "5 g" figure with no size attached is not a specification — it is a headline. Ask which size the weight is quoted for, and check the weight for that size. For reference, the weights EASTGLOVES quotes for its standard lines are: nitrile 100-piece gloves at about 3.0 g (M), 3.5 g (L) and 4.0 g (XL); vinyl gloves at about 4.0 g (M), 4.5 g (L) and 5.0 g (XL). Treat these as the specification to confirm on your order, not as a promise for every size.
Do not compare weights across materials. Vinyl weighs more per glove than nitrile at a similar feel, because the material is denser — a 4 g vinyl glove is not "stronger" than a 4 g nitrile glove, it is a different product. Compare nitrile with nitrile, vinyl with vinyl. If you are choosing between grades, start with the 3.5 g / 4 g / 5 g nitrile comparison and the vinyl gloves page, then confirm the weight for the size you order most.
2. Why weight tells you more than thickness
Thickness is measured in mil at one point on the glove, usually the palm or the fingertip. A glove can be thick at the palm and thin at the cuff, and a single mil figure will not show it. Weight covers the whole glove: every gram is material that was actually dipped, so the weight is a fairer summary of how much glove you are getting. Two gloves quoted at the same thickness can weigh differently — and the heavier one usually has more material where it counts.
Weight is also the main cost driver. Material is the largest share of what a disposable glove costs to make, so the cost of an order is driven first by how much material each glove contains — by its weight and by the quantity — and then by packing, box specification and freight. That is why weight is the first thing to check when two quotations look far apart: an underweight glove is usually a cheaper glove, not a better deal. The honest comparison is always the same grade, the same reference size, the same packing — and then the weight.
For the buyer, the practical rule is simple: a heavier glove is stronger and lasts longer, but it is less sensitive and more tiring over a long shift. A lighter glove gives better feel and less hand fatigue, but it will not survive the same workload. Choose the grade for the task, not for the number.
3. How to weigh gloves when the cartons arrive
A weight check takes ten minutes and a small digital scale. Do it on arrival, before the cartons are split and the gloves are distributed — once gloves are mixed into stock, a weight dispute is much harder to settle.
- Use a digital scale that reads to 0.01 g, calibrated and tared, on a level surface. A kitchen scale that reads to 1 g is not precise enough — the difference between grades is half a gram.
- Sample across the delivery. Take gloves from different cartons and different boxes, not ten gloves from a single box.
- Weigh gloves of the agreed reference size only, one glove at a time. Record each reading and take the average of at least ten gloves.
- Compare the average with the agreed specification for that size — not with a weight quoted for a different size.
- Photograph the scale reading with the box label visible, and keep the written record with the packing list.
If the average is clearly below the agreed weight for the reference size, do not distribute the stock first and argue later. Raise it with the supplier with the photos, the readings and the packing list — and the remedy should already be in the order terms agreed before production.
4. What to agree in writing before you order
Most weight disputes are not about the gloves. They are about what was never written down. Before production starts, put four things in the order:
- The grade and the reference size — for example, "4 g, size L" — not just "4 g".
- The sampling plan: how many gloves will be weighed, from how many cartons, and how the average is calculated.
- The remedy if the average comes in below the agreed weight: re-make, replacement, or credit — agreed before production, not after delivery.
- The inspection level for the order, for example inspection to an agreed AQL. EASTGLOVES supplies to AQL 1.5–4.0 depending on the intended use — agree the level for your order in writing.
Keep one sealed reference box from the approved sample batch. If a later delivery is questioned, the reference box is the comparison that settles it. All EASTGLOVES disposable gloves are supplied under CE and ISO 13485 certification, with Saudi MDMA approval — confirm the documents name the exact SKU on your order.
5. Common reasons a weight check looks wrong
Not every low reading means the gloves are underweight. Check these five mistakes first:
- Checking XL gloves against a weight quoted for M — the larger size will always read heavier.
- Weighing a pair instead of one glove — a pair weighs double, and the mistake is easy to make.
- Weighing the glove with its packaging, or with the box — weigh the glove alone.
- A scale that was not tared, or that only reads to 0.1 g — at half-gram grade steps, that is not precise enough.
- Mixed sizes in one carton — check the size printed on the box before you weigh.
If the check is clean and the average is still below the agreed weight for the reference size, the problem is real. Go back to the supplier with the record — that is what the written agreement is for.
6. Weight, carton weight and your order
Weight follows the glove all the way to the freight bill. Standard EASTGLOVES packing is 100 gloves per box and 10 boxes per carton, so a heavier grade means a heavier carton — and the carton gross weight goes on the packing list, where it feeds directly into the freight calculation. When you compare quotations, compare the carton data as well as the glove weight: same grade, same packing, same carton count.
Practical terms for an EASTGLOVES order: the minimum order is 1,000 cartons, quoted FOB Ningbo, with a lead time of about 30 days. Samples are not free, and sample freight is not free either — but the sample cost can be deducted after an order is placed. Weigh the sample the same way you will weigh the bulk delivery, and approve bulk production against the sample, not against the catalogue photo. Start with the nitrile gloves and 4 g nitrile gloves pages, or send the grade, size mix and quantity through the inquiry form — WhatsApp is +86 138 5785 4761.
Procurement FAQ
What does "3g nitrile glove" mean?
One glove weighs about 3 grams, usually quoted for a size M or L glove. Always ask which size the weight is quoted for — the same grade weighs more in XL than in S.
Is a heavier glove always better?
No. A heavier glove is stronger and lasts longer, but it is less sensitive and more tiring over a long shift. A lighter glove gives better feel for fine work and frequent changes. Choose the grade for the task.
How many gloves should I weigh?
At least ten gloves per size, sampled from different cartons and boxes, weighed one at a time on a 0.01 g scale. Average the readings and compare with the agreed weight for that size.
What if the gloves weigh less than agreed?
Raise it with the supplier with the scale photos, the readings and the packing list — and check the order terms. The remedy (re-make, replacement or credit) should have been agreed in writing before production.
Does glove weight matter for food service?
Yes, for durability through a shift. Most food-service buyers order 3–4 g nitrile or vinyl gloves, and check the weight for the size they order most. Vinyl weighs more per glove than nitrile at a similar feel, so compare within one material.
What to send with your first inquiry
A complete first inquiry gets a faster, more accurate quotation than three rounds of follow-up questions. Send the material (nitrile or vinyl), the weight grade and reference size, the size mix, the quantity in cartons, and the destination port. A supplier who receives "1,000 cartons of 4 g nitrile, size L, FOB Ningbo" can quote the same day; a supplier who receives "gloves, best price" cannot.